MOULDS FOR ZAMAK
MOULDS FOR ZAMAK
The manufacture of Zamak parts requires a range of moulds with the best mechanical properties and excellent thermal resistance, which guarantees a long useful life of the mould.
Our range of moulds
-
SILCODISCEXTRA 65
- BLUE
- 65 Sh A
- High thermal resistance
- Low Flexibility35
- Medium pieces
- Medium extraction difficulty pieces.
- Diameters from 200mm to 500mm
- Thickness from 8mm to 16mm
- ZAMAK and tin-lead alloys
-
SILCODISCEXTRA 70
- DARK BLUE
- 70 Sh A
- High thermal resistance
- Very low flexibility25
- Small and medium pieces
- Flat parts easy to remove
- Diameters from 200mm to 500mm
- Thickness from 8mm to 16mm
- ZAMAK and tin-lead alloys
Our range of moulds SPECIAL BISUTTERY ZAMAK (high tear)
-
SILCODISCBZ55HT
- LIGHT YELLOW
- 55 Sh A
- Good mechanical resistance
- High thermal resistance
- Very high flexibility90
- Small and medium pieces
- Parts with high extraction difficulty
- ZAMAK and tin-lead alloys
-
SILCODISCBZ60HT
- PINK
- 60 Sh A
- Good mechanical resistance
- High thermal resistance
- High flexibility70
- Medium pieces
- Pieces with medium/high extraction difficulty
- ZAMAK and tin-lead alloys
-
SILCODISCBZ65HT
- GREEN
- 65 Sh A
- Good mechanical resistance
- High thermal resistance
- Medium flexibility50
- Medium pieces
- Pieces with medium extraction difficulty
- ZAMAK and tin-lead alloys
Our range of special rubber moulds for ZAMAK (high thermal resistance)
-
ZAMAKDISCA
- RED
- 76 Sh A
- High thermal resistance
- Low flexibility15
- Medium pieces with difficulty of medium extraction.
- Zamak and tin alloys.
-
ZAMAKDISCD8
- BEIGE
- 80 Sh A
- High thermal resistance
- Zero flexibility5
- Medium pieces with difficulty of medium extraction.
- Zamak and tin alloys.